No products
For convenience,
products are pictured
on a 1" x 1" grid.
USED, salvaged from school surplus equipment.Listing is for one (1) each fuse block, Bussmann 1B009 LR21455, comes exactly as shown in the photo.• 3 Pole • 250V 30 Amp• Quick Connect Box Lug Wire Terminals• Accepts 2" x 9/16" Fuse (not included)• Max Rating 10,000 RMS • 10 AWG CU 35, 8 AWG AL 40
Used Twist-Lock In-Line Fuse Holder; Rated 20A. to 32V., Accepts 1 1/4" x 1/4" fuses; 2 1/4" overall length; 12" of attached #20 AWG wire @ 32V., Product Markings: 155 Series
Used Fuse Holder Cap; .635" overall height; .634" outside cap diameter; Fingergrip bayonet twist type cap
Used Fuse Holder Clip; 1/2" height; 1/8" mounting hole; Accepts 1 1/4" x 1/4" fuse; Screw not included
Used Fusetron Time Delay Fuse; 20A. 250V., 2" x 9/16", Used to handle short circuits and current overloads; Product Markings: Dual element, time delay, current limiting, class RK5 fuse, HRC-I, 200,000 amps. rms.
USED, acquired through school surplus.Listing is for one (1) each enclosed switch fuse box, Federal Pacific Cat. No. 3322, Issue No. AC-114, Fusetron FRN 30 amp time delay fuses included, no instruction manual, comes exactly as shown in the photo.• 30 Amp• 2 Pole• 240VAC 125/250VDC
Used 2 Pole 600V. 30A. Fuse Block; Quick connect screw terminals; Accepts 1 1/2" x 13/32" fuses; Product Markings:113P80462 B 13873 4178 11425
USED Panel Mount Fuse Holder & Panel Plate, rated 20A 250V, accepts 1-1/4" x 1/4" fuse, 2-1/4" overall length, finger grip bayonet twist knob, mounting nut included, fuse sold separately. Product Markings: Series 342004
Used Fuse Holder Cap; .749" overall height; .673" outside cap diameter; Fingergrip bayonet twist type cap
Used Fuse holder clip; .573" height; .17" mounting hole; Accepts 13/32" Dia. Fuse; Screws not included
Used 3 Pole 250V. 30A. Fuse Block; Quick Connect Screw Terminals; Accepts 2" x 9/16" fuses; Product Markings: 8431-3
USED Snap Mount Fuse Holder, rated 15A 250V, accepts 1-1/4" x 1/4" fuse, snaps into panels, 2-1/4" overall length, red bezel cap, face cover measures 0.679" Height x 0.700" Width, fuse housing measures 0.609" Height x 0.609" Width x 0.150" Depth, 1/4" solder/quick-connect terminals, fuse sold separately. Product Markings: 348 Series
Used Fuse Holder Cap; .652" overall height, .687" outside cap diameter; Fingergrip bayonet twist type cap
Filters